2019 Exmark RAX691GKA524A3
Check out the Exmark Radius X-Series, the latest in commercial zero turns.
Exmark Radius X-Series zero-turn mowers deliver the cut quality and durability professionals demand with a host of new features and innovations. Powered by Kawasaki FX engines, with Hydro-Gear integrated transmissions and up to 10 mph fwd. ground speed, Radius X-Series improves productivity, but a full-suspension operator seat with operator preference dial and elastometric vibration control (EVC) means maximum comfort. Available with 48-, 52- and 60-inch UltraCut mower decks.
- UltraCut Deck Technology: Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
- Quick Adjustable Rollover Protection System (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
- Fuel Gauge Window: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
- Heavy Duty Unibody Frame: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
- Comfort Stepped Up: X-Series machines step up to Exmark's full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
- Height of Cut Made Easy: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
- Service Made Easy: A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.
- Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
- Drive Tires: 24 x 9.5-12 K500
- Tractor Frame: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
- Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
- Parking Brake: Lever-actuated pawl brake.
- Seat: Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
- Electrical: 12-volt battery with 15-amp alternator.
- Standard Features: Engine hour meter, cup holder, tow hitch and jack receiver
- UPC: 193308000428
- Engine Brand: Kawasaki®
- Engine Model: FX691V
- Engine Displacement: 726
- Engine Series: V-Twin
- Fuel System: Carbureted
- Engine Speed: 3,700 rpm
- Air Filter: Cyclonic Air Cleaner
- Fuel Type: Gas Carbureted
- Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
- Fuel Indicator: Translucent Visual
- Drive: Hydro-Drive
- Drive Description: Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
- Speed: Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse.
- Carb Compliant: No
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS: 2-post foldable ROPS standard with seat belt and latch.
- PTO Engagement: MagStop electromagnetic 125-ft-lb clutch
- Drive Wheel Release: Allows unit movement without engine running.
- Casters: .375" thick caster yoke arms
- Model Description: Radius X-Series 22 HP* Kaw FX691V w/52" UltraCut Series 4 Deck, Susp Seat & Wide Pneum
- Width / Cutting Deck: 52"
- Deck Style: Floating Deck
- Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
- Blade Tip Speed: Approximately 18,500 fpm.
- Cutting Heights: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
- Blades: 3 Blades at 18.00" Length
- Width: 64.6 in (164.1 cm)
- Length: 81.7 in (207.5 cm)
- Height: 70.4 inches (178.8 cm)
- Curb Weight: 957
- Engine Manufacturer
- Engine Type
- Wheel Size
- 24 x 9.5-12 K500
- Fuel Capacity
- 7 gal. (26.5 L)
- Deck Size
- 52 in.